Services - ATV/SSV/UTV

From an oil change to collision damage, we have you covered.

CAN-AM MAINTENANCE SCHEDULE IN MUDDY/DUSTY CONDITIONS OR WHEN LOAD CARRYING

EVERY 750KM (500 MI) OR 25 HOURS (whichever comes first)

• Verify and clean engine air filter. Replace as needed
• Verify battery connections
• Inspect front differential, middle differential (6x6 models) and rear final drive oil level and look for contamination.
• Replace if necessary (X mr models)
• Lubricate rear propeller shaft joint
• Inspect tie rod ends and ball joints for play and boots condition
• Lubricate front suspension arm bushings
• Lubricate front (if equipped) and rear stabilizer bar bushings
• Inspect the drive shaft boots and protectors
• Inspect brake pads. Replace as needed
• Inspect wheel bearings for abnormal play
• Inspect and clean CVT air filter. Replace as needed. (If equipped)
• Tighten wheel beadlock bolts (If equipped)
• Lubricate lower shock absorber spherical bearings (Outlander Limited, XT-P and X xc models)
• Lubricate upper shock absorber spherical bearings (Outlander Limited and X mr 1000R)

EVERY 1 500 KM (1,000MI) OR 50 HOURS (whichever comes first)

• Adjust valve clearance
• Clean muffler spark arrester
• Verify and clean throttle body
• Replace fuel vent breather filter
• Verify CVT drive belt and clean CVT pulleys
• Lubricate the one way bearing of the drive pulley
• The following must be performed at least once a year:
• Change engine oil and filter
• Lubricate throttle cable
• Inspect and clean brake system
• Inspect battery condition
• Verify steering system for abnormal play
• Verify front differential and rear final drive oil level and look for contamination
• Verify gearbox oil level and look for contamination (except 450)

PERFORM AT THE FIRST 1 500KM (1,000 MI) AND AT 3 000KM (2,000MI) THEN FOLLOW THE REGULAR SCHEDULE

• Replace gearbox oil (except 450)
• Clean the vehicle speed sensor (VSS) (except 450)

EVERY 3 000 KM (2,000MI) OR 100 HOURS (whichever comes first)

• Verify the cooling system
• Test engine coolant strength
• Verify fuel system for leaks
• Verify fuel pump pressure
• Replace spark plugs
• Replace front differential oil
• Replace middle drive unit oil (6x6 models) and rear final drive oil
• Replace gearbox oil (except 450)
• Inspect input and output shaft seals (gearbox, differential and final drive)
• Clean vehicle speed sensor
• Clean and lubricate lower and upper steering column half bushings
• The following must be performed every 2 years:
• Replace the brake fluid

EVERY 6 000 KM (4,000MI) OR 5 YEARS (whichever comes first)

• Replace engine coolant

You've spoken and we listened.